Available in 25 kg PE lined paper bags.

Cement/sand rendering, brickwork, aerated concrete.
Screed, older than 28 days.
Concrete in situ and precast units/slabs, older than 6 months.
Plaster, wood, existing tiles, vinyl, and paint are not considered suitable surfaces for exterior use or in areas exposed to frequent or permanent water

The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner
Straightening of lumps and unevenness of up to 15 mm can be carried out using Alfix Normalfix.
On absorbent, moisture sensitive interior surfaces, such as aerated concrete, gypsum plaster, plaster boards, and anhydrite floors, apply Alfix Primer (Sealing Primer) or Alfix PlaneMixPrimer
For exterior use, apply a thin contact layer of Alfix Mediofix.

Add approx. 0.2 litres of clean, cold water per kg powder corresponding to 5.0 litres of ready mixture per 25 kg bag.
Apply Alfix Mediofix to the surface with a notched trowel, using the straight edge to spread out adhesive and subsequently the notched edge to produce a ribbed bed.
Fix tiles within 15 - 20 minutes by pressing them firmly into position in the wet adhesive with a slight twisting action.
Ensure complete adhesive coverage!
For exterior use, e.g. facades and pools, regardless of tile size, apply adhesive to both tiles and surface to ensure solid bedding leaving no voids (buttering/floating method).

NB!
Large-sized tiles and natural stone may call for extra attention.
Additional water should not be added to adhesive already starting to set. Note that the temperature of mixing water will influence setting time.
Addition of Alfix Flexbinder may retard setting.
Repositioning of tiles should be done within approx. 15 minutes after fixing, depending on substrate and tile absorbency.

IRRITANT

Clean adhesive residues from tools and tiles with water before the adhesive sets. Cement-based products harden when mixed with water, hence do not pour surplus adhesive into the drain system.

DS/EN 12004

When mixed with Alfix Flexbinder a highly flexible adhesive is obtained being very suitable for green/new concrete, light–weight concrete, wooden floors, PVC, vinyl, fibreglass and steel.

Wet rooms – Tanking with Alfix
Product info on:
• Alfix Deep Cleaner
• Alfix Flexbinder
• Alfix Primer (Sealing primer)
• Alfix PlaneMixPrimer
Product health and safety data /COSH

For further information, please consult our Technical Services Dept.