For substrate preparation prior to sealing with Alfix P-Silicon
- Improves bonding to ceramic tile edges
- Suitable for areas permanently exposed to water
- Designed for swimming pool application
- For interior and exterior use
Fast acting, thin, clear liquid.
Approx. 100 running metres per can.
200 ml can
+5°C - +40°C
Approx. 1 hour at +20ºC
Min. 12 months in unopened cartridges. Store cool.
Remove any excess residues from adhesive or grout down to original substrate by grinding.
For pool application bonding surfaces should always be primed.
Ensure joint widths ranging from 10-15 mm.
Bonding surfaces should be dry, clean and degreased. Vacuum and degrease using acetone or methylated spirit.
How to use
Apply masking tape along tile edges. Apply Alfix P-Primer to both bonding surfaces in an even coat and allow primer to dry completely before any further treatment.
Residues from Alfix P-Primer on tools, equipment, etc should be cleaned immediately after use with methylated spirit. Once dried, P-Primer can only be removed by mechanical means.