PlaneMix 25 exterior

Self-levelling and smoothing compound. Interior and exterior use
- Suitable for locations requiring finished floor surface ready
- For straightening and levelling of substrates
- For balconies, car washes and industrial floors
- for locations exposed to upcoming moisture
- For interior and exterior use
- Foot traffic after 3 hours
- Water and frost resistant
- For slope building
- Suitable for underfloor heating
- Thickness: 2 - 25 mm
Product facts
Product
Grey, fast-setting, polymer modified powder on the basis of aluminous cement.
Colours
Coverage
Coverage
Approx. 1.7 kg per m² /mm thickness.
Packaging
Available in 20 kg PE lined paper bags.
Features
Generel
Expected Result
Application
Waterproofing
Surface preparation
Fixing dowels
Finishing
Sealings
Flooring
Prior to further installation, make sure that the relative humidity on location corresponds to the floor covering in question. Curing rate is influenced by temperature, humidity, ventilation, as well as sub-floor construction.
Tiling: 24 hours at +20°C
Tanking and tiling: Allow min. 48 hours at +20°C.
Precautions
![]() |
Alfix A/S H.C. Oersteds Vej 11-13 DK-6000 Kolding alfix.com 14 |
Declaration of performance No. 30 |
DS/EN 13813 CT-C35-F7
Alfix PlaneMix 25 |
Reaction to fire | A2fl-s1 | Release of corrosive substances |
CT |
Water permeability | NPD | Water vapour permeability | NPD |
Compressive strength | C30 | Flexural strength | F7 |
Wear resistance | NPD | Sound insulation | NPD |
Sound absorption | NPD | Thermal resistance | NPD |
Chemical resistance | NPD |
Tile fixing
Tile fixing
Tests
IRRITANT
Surfaces
Technical data
+10°C - +25°C
2.1 kg/litre (mixed with water)
Approx. 115-125 mm
20 - 30 minutes at +20°C
After 3 hours at +20°C
After 24 hours at +20°C
After 7 days at +20°C
25 - 35 N/mm²
Min. 12 months in unopened bag
How to use
Surfaces
Concrete subfloors, max humidity 95% RH. Cohesive strength should be min. 1 N/mm².
Ceramic tiles, terrazzo.
For further information and details, please contact our Technical Services Dept.
Surface preparation
Exterior
The surface should be dimensionally stable, sound, clean and free from dust and laitance. Further, substrate should be water and frost resistant. Existing concrete floors should be sanded/ cleaned prior to levelling.
Concrete floors should be primed with Alfix PlaneMixPrimer diluted 1:6 with water.
Dense surfaces require pretreatment with Alfix Expoxy Grunder, 2-component epoxide primer system, added sand once applied.
Priming of other surfaces, please consult our Technical Services Dept.
Outdoor temperature should be min. +10°C while working.
Allow primer to dry before commencing further treatment, usually drying time is 1 hour at +20°C.
Application of levelling compound should be made within 24 hours after priming.
Use self-adhesive foam tape to retain at doors, around floor drains, etc. If possible prevent compound from obtaining contact to walls. For thicknesses exceeding 5 mm, always apply self-adhesive foam tape for walls.
Should levelling imply several layers, priming before each new application is required. Interior
The surface should be dimensionally stable, sound, clean and free from dust and laitance. Residues from grease or soap can be removed with Alfix Deep Cleaner. To remove laitance or roughen smooth surfaces, use mechanical preparation, such as sanding or grinding, and vacuum subsequently.
Concrete floors should be primed with Alfix PlaneMixPrimer diluted 1:3 with water
Priming of other surfaces, please consult our Technical Services Dept.
Ensure a room temperature of min. +10°C while working. Allow primer to dry before commencing further treatment. Application of smoothing compound should be made within 24 hours after priming.
Use self-adhesive foam tape to retain at doors, around floor drains, etc. If possible prevent compound from obtaining contact to walls. For thicknesses exceeding 5 mm, always apply self-adhesive foam tape for walls.
Should levelling imply several layers, priming before each new application is required.
How to use
Add 3,2 – 3,6 litres of clean cold water per 20 kg bag of powder. Pour water into a clean container and sprinkle in powder while stirring continuously.
If possible, use large mixing container or drum for more bags at a time and mix until a lump-free, easy-flowing mix is obtained. Mixing time is approx. 2 minutes using rotary drill paddle.
Pour or pump Alfix PlaneMix 25 onto the prepared substrate and spread with notched or straight trowel until the compound flows together into a smooth and even surface.
For thicknesses exceeding 25 mm, incorporate kiln dried sand to extend coverage.
NB!
Additional water should not be added to levelling compound already starting to set.
Note that the temperature of mixing water will influence working time/pot life.
Over dosage of water will reduce strength and may produce laitance. Protect from draughts, direct sunlight, and heat, especially during the first 3 days upon application. If possible cover up with foil or plastic sheet.
Colour and appearance of finished levelling layer will be influenced by substrate moisture content and weather conditions.
Close broken packaging carefully after use and use the rest within the shortest possible time.
Always complete with a finished floor surface, for example ceramic tiles.
Cleaning
Tools and tiles should be cleaned with water before the compound sets.
Cement-based products harden when mixed with water, hence do not pour surplus PlaneMix into the drain system.