ReadyFlex

Ready mixed tile adhesive
- For ceramic tiles and marble
- Suitable for insulating plates
- For interior use
- Flexible and water resistant
- Easy and smooth consistency
- Bed thicknesses up to 3 mm
Product facts
Product
White, ready-to-use paste based on polymer dispersion.
Colours
Coverage
Coverage
Packaging
Available in 4 kg and 15 kg plastic buckets.
Features
Generel
Expected Result
Application
Waterproofing
Surface preparation
Fixing dowels
Finishing
Sealings
Flooring
Precautions
![]() |
Alfix A/S H.C. Oersteds Vej 11-13 DK-6000 Kolding alfix.com 04 |
Declaration of performance No. 14 |
EN 12004:2007+A1:2012 Alfix ReadyFlex Dispersionsbaseret fliseklæber med forbedret vedhæftning, og åbentid. Indendørs anvendelse. |
Reaction to fire | NPD | Farlige stoffer | Se sikkerhedsdatablad på www.alfix.com |
Bond strength: Initial tensile adhesion strength |
≥ 1,0 N/mm² | Vedhæftningsstyrke efter varmelagring (EN1324:2007) | ≥ 1,0 N/mm² |
Durability, tensile adhesion strength after water immersion |
≥ 0,5 N/mm² | Vedhæftningsstyrke efter lagring ved øget temperatur (EN1324:2007) | ≥ 1,0 N/mm² |
Tile fixing
Tile fixing
Tests
DS/EN 12004
Surfaces
Technical data
+10°C - +30°C
1.6 kg/litre
approx. 30 minutes
24 – 48 hours at +20°C
28 days at +20°C
1.6 – 2.5 N/mm²
0.2 – 0.4 N/mm² (failure in the substrate)
0.6 N/mm² (failure in the substrate)
D2 E
Min. 12 months in unopened container. Free from frost.
How to use
Surfaces
Cement/sand rendering, brickwork, concrete and aerated concrete. Paper-faced plaster boards, fibre-reinforced plaster boards. Timber boards in dry locations.
Surface preparation
The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner.
On absorbent surfaces apply Alfix Primer (Sealing Primer) or Alfix PlaneMixPrimer.
How to use
Apply Alfix ReadyFlex to the surface with a notched trowel, using the straight edge to spread out adhesive and subsequently the notched edge to produce a ribbed bed.
Fix tiles within 15 - 20 minutes by pressing them firmly into position in the wet adhesive with a slight twisting action. Ensure complete adhesive coverage!
When fixing marble, apply a thin contact layer to the back of the tiles before pressing them into the adhesive.
NB!
When used on dense surfaces or for non-absorbent tiles, setting time is extended.
Either surface or tile should be absorbent to ensure proper curing.
Switch off any underfloor heating.
Cleaning
Clean adhesive residues from tools and tiles with water before the adhesive sets. Once set, the paste can be removed mechanically or with solvent.