Thixotropic agent
Additive for Alfix C2 Epoxy
For grouting and bonding of ceramic tiles and mosaic Suitable for pools, the food industry and the chemical industry Withstands high mechanical loads For indoor and outdoor use Joints widths 1.5 - 10 mm For walls and floors Easy to use Fungus and mould resistant Very low emission EC1 plus Product calculator
Product facts
Product
Two-component epoxy system, solvent-free.
Colours
Supplied in Manhattan steel grey, white, graphite, anthracite grey and black grey.
Light beige – subject to minimum quantities.
Coverage
Coverage
Tiling
About 1.4 kg per m²/mm layer thickness.
Notch size Kg per. m²
4 x 4 mm approx. 1.8
6 x 6 mm approx. 2.8
8 x 8 mm approx. 3.8
10 x 10 mm approx. 4.7
GroutingApprox. 0.6 - 2 kg per m² depending on the tile size and the size of the grout line.
Tile size/width of grout line Kg per m²
25 x 25 x 5 mm / 2 mm approx. 0.3
50 x 50 x 5 mm / 2 mm approx. 0.5
100 x 100 x 7 mm / 4 mm approx. 0.8
110 x 240 x 12 mm / 6 mm approx. 1.3
110 x 240 x 18 mm / 6 mm approx. 1.9
110 x 200 x 12 mm / 6 mm approx. 1.4
Packaging
Supplied in 6 kg plastic buckets containing component A (binder) plus component B (hardener).
Features
Generel
Expected Result
Application
Waterproofing
Surface preparation
Fixing dowels
Finishing
Sealings
Flooring
Precautions
 |
Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 18 |
Ydeevnedeklaration nr. 44 | EN 12004:2007+A1:2012 Alfix C2 Epoxyfuge Syrefast fugemasse og fliseklæber til keramiske fliser |
| Brandklasse | Klasse E | Farlige stoffer | Se sikkerhedsdatablad på www.alfix.com |
| Vedhæftningsstyrke efter tørlagring (EN12004:2007+A1:2012) |
≥ 2,0 N/mm² | Vedhæftningsstyrke efter temperaturveksellagring (2004:2007+A1:2012) |
≥ 2,0 N/mm² |
| Vedhæftningsstyrke efter vandlagring (EN12004:2007+A1:2012) |
≥ 2,0 N/mm² |
Tile fixing
Tile fixing
Tests
EN 13888 RG and EN 12004, R2T
Surfaces
Technical data
+15°C - +25°C
Approx. 1.4 kg/litre at +23°C
40-45 minutes at +23°C
After approx. 15 minutes or up to 1 hour at +23°C
After 16 hours at +23°C
After 2 days/7 days at +23°C
Fracture in substrate > 2 N/mm².
+100°C
Approx.12 months in a frost-free, dry and cool place in unopened packaging
How to use
Surfaces
Surface preparation
How to use
Add to the C2 Epoxy paste while mixing.
Cleaning
Use warm water and detergent to clean grout residues from tools, etc. immediately after use. Once hardened, the grout can only be removed by scraping. You can try to remove epoxy residues with a product like CR10 from FILA or SERVICE EPOSOLV from Treetops.
