Ready mixed tile adhesive

  • For ceramic tiles and marble
  • Suitable for insulating plates
  • For interior use
  • Flexible and water resistant
  • Easy and smooth consistency
  • Bed thicknesses up to 3 mm

Product calculator

Product facts


White, ready-to-use paste based on polymer dispersion.




Notched trowel
Coverage per m²
3 x 3 mm
approx. 1,6
4 x 4 mm
approx. 2,0
6 x 6 mm
approx. 3,0
8 x 8 mm
approx. 4,0


Available in 4 kg and 15 kg plastic buckets.



Expected Result



Surface preparation

Fixing dowels





Alfix A/S H.C. Oersteds Vej 11-13 DK-6000 Kolding
Declaration of performance
No. 14
EN 12004:2007+A1:2012
Alfix ReadyFlex Dispersionsbaseret fliseklæber med forbedret vedhæftning, og åbentid. Indendørs anvendelse.
Reaction to fire NPD Farlige stoffer Se sikkerhedsdatablad på
Bond strength: Initial
tensile adhesion
≥ 1,0 N/mm² Vedhæftningsstyrke efter varmelagring (EN1324:2007) ≥ 1,0 N/mm²
Durability, tensile adhesion
strength after water
≥ 0,5 N/mm² Vedhæftningsstyrke efter lagring ved øget temperatur (EN1324:2007) ≥ 1,0 N/mm²

Tile fixing

Tile fixing


DS/EN 12004


Technical data

Working temperature

+10°C - +30°C


1.6 kg/litre

Open time

approx. 30 minutes

Foot traffic/grouting

24 – 48 hours at +20°C

Full strength

28 days at +20°C

Tensile adhesion strength concrete

1.6 – 2.5 N/mm²

Tensile adhesion strength paper-faced plaster boards

0.2 – 0.4 N/mm² (failure in the substrate)

Tensile adhesion strength timber boards

0.6 N/mm² (failure in the substrate)

Classification -DS/EN 12004

D2 E

Shelf life

Min. 12 months in unopened container. Free from frost.

How to use


Cement/sand rendering, brickwork, concrete and aerated concrete. Paper-faced plaster boards, fibre-reinforced plaster boards. Timber boards in dry locations.

Surface preparation

The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner.
On absorbent surfaces apply Alfix Primer (Sealing Primer) or Alfix PlaneMixPrimer.

How to use

Apply Alfix ReadyFlex to the surface with a notched trowel, using the straight edge to spread out adhesive and subsequently the notched edge to produce a ribbed bed.

Fix tiles within 15 - 20 minutes by pressing them firmly into position in the wet adhesive with a slight twisting action. Ensure complete adhesive coverage!

When fixing marble, apply a thin contact layer to the back of the tiles before pressing them into the adhesive.


When used on dense surfaces or for non-absorbent tiles, setting time is extended.
Either surface or tile should be absorbent to ensure proper curing.
Switch off any underfloor heating.


Clean adhesive residues from tools and tiles with water before the adhesive sets. Once set, the paste can be removed mechanically or with solvent.

August 2019

Alfix CeraFill 10 colour Universal grout has been improved, and its name is now being changed to UniversalFuge - CeraFill 10.


Read moreSee the archive here


Hochprofessioneller technischer Service

Kontaktieren Sie uns für Beratung und Unterstützung in Ihrem professionellen Bauprojekt.

So verwenden Sie Ihr Alfix-Produkt

Wie Sie mit Ihrem DIY-Projekt einen reibungslosen Start hinlegen