- As underlay for most types of flooring
- For application directly beneath top flooring
- Excellent impact noise insulation beneath ceramic tiles and natural stone flooring
- Installation thickness of 3–4 mm
- High compressive strength
- For use in wet rooms and dry rooms
- As underlay for direct tile installation in residences and premises for light business
- Deflects movements in substrates
- Made of 100% recycled rubber material and natural cork
Products
-
-
PlaneMix 90 PlusSemi-dry screeding mortar
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
1K sealing membrane
-
2K sealing membrane
-
Sealing Primer
-
Waterproofing membrane Pro
-
Epoxy Membrane
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Tanking accessories
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix PlusFlexible low-dust tile adhesive – Light
- Up to 600 x 600 mm -
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
Montagelim1-component all-round mounting adhesive
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
LetFix less dust - DISCONTINUED - replaced by LetFix PlusFlexible dust reduced tile adhesive - Light
-
LetFix - DISCONTINUED - replaced by LetFix PlusFlexible tile adhesive - Light
-
-
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Sealing Primer
-
FlexBinder
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
Acoustic PS3 - Recycled
Acoustic underlay
Retailers
Product information
Product
Fine recycled rubber granules and cork with PU (polyurethane) elastomer bonding agent.
Supplied in 10 m rolls.
Width: 1 m. Thickness: 3 mm.
Weight: Approx. 22 kg per roll
Coverage
Covers approx. 10 m²/roll.
Packaging
19 rolls per pallet.
Tests
Testet in highly accredited institute for impact noise and thermal insulation properties according to ISO 10140
-1 and 3 and ISO 717-2 standards.
EMICODE EC1 PLUS
Indoor Air Comfort® Passed
Technical data
- Acoustical results - Impact noise reduction - 3 mm
- ΔLW = 16 dB with ceramic tiles
- EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 19 dB with laminate - EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 16 dB with glued down wood - EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 19 dB with LVT flooring - The above values are based on laboratory tests and determined according to DIN EN ISO 140-8 standards,which serve as guiding values. Actual effect and performance will determine on the specific construction and flooring. On site values can be determined by means of trial installation and measuring.
- Max surface load
- 2.5 kN/m²
- Max point load
- 3.0 kN allocated to 0.1 x 0.1-meter load distributing plate
- Thermal conductivity
- 0.080 W/mK
- Temperature delay
- 0.038 m²K/W
- Density
- Approx. 600-700 kg/m³
- Diffusion
- Diffusion-open
- Storage
- Should be stored in a dry location at constant temperature.
Application
Surfaces
Concrete with or without underfloor heating, existing tiles and terrazzo.
Use as bonded or floating coating on screed.
For further information or details, please contact our Technical Services Dept.
Surface preparation
The surface should be dimensionally stable, sound, clean and free from dust and laitance. For surfaces requiring bonded coating, broom or brush the surface with a mixture of Alfix PlaneMixPrimer and Alfix PlaneMix 100 in the ratio 1:1.
Apply the mixture thoroughly by use of brush or broom and work it well into the surface.
Do not allow the slurry to dry before further treatment.
Ensure a room temperature of min. +10°C.
How to use
When used for direct tile installation, the application of Acoustic PS3 – Recycled is restricted to load
category C1 in accordance with DS/EN 1991-1-1:2007.
Max. surface load: 2.5 kN/m²
Max. spot load: 3.0 kN distributed over 0.1 x 0.1 m pressure distributing panel.
Under no circumstances should pallet trucks, Ride-On floor-washers or other transport equipment with
hard wheels be used on areas of tile laid on Acoustic PS3 – Recycled.
The impact noise values stated in this product information are material values obtained as laboratory
measurements in accordance with DIN EN ISO 140-8. They are intended exclusively as indicative values.
The effect improvement achieved in the construction in question will depend on the structure of the
construction as a whole.
NB! We recommend performing an impact noise measurement of the structure before starting to install the
impact noise-insulation mat. Use the results of the measurement to assess whether the impact
noise-insulation mat will meet the requirements for the desired impact noise level.
The impact noise reduction achieved after fitting the mat, etc. should be verified using a test installation
and test measurement, and if impact noise levels have been specified for the construction in question,
we recommend involving a sound technician in the project.
Top floorings of wood, laminate and LVT
Glue and fix directly onto Alfix Acoustic PS3 Recycled in accordance with manufacturer’s instructions.
Water proofing
When used in wet rooms, tanking is always required and hence, apply Alfix 1K Sealing membrane or Alfix 2K Sealing membrane onto Acoustic PS3 - Recycled.
Tile fixing
Fix tiles using a flexible tile adhesive, such as Alfix CombiQuickFix or Alfix ProFix. For compatibility, test product on limited trial area.
Tile sizes
Min. tile size is 10 x 10 cm. Min. thickness of ceramic tiles: 9 mm. Natural stone: 15 mm.
Grouting
For grouting, use Alfix UniversalFuge CeraFill 10 or Alfix QuickFuge Premium 8.
For sealing of pipe penetrations and movement joints where wall abuts floor, use Alfix M-Silicon.
Any expansion or movement from the substrate should always be upwards directed and into the flooring.
Product
Fine recycled rubber granules and cork with PU (polyurethane) elastomer bonding agent.
Supplied in 10 m rolls.
Width: 1 m. Thickness: 3 mm.
Weight: Approx. 22 kg per roll
Coverage
Covers approx. 10 m²/roll.
Packaging
19 rolls per pallet.
Tests
Testet in highly accredited institute for impact noise and thermal insulation properties according to ISO 10140
-1 and 3 and ISO 717-2 standards.
EMICODE EC1 PLUS
Indoor Air Comfort® Passed
Technical data
- Acoustical results - Impact noise reduction - 3 mm
- ΔLW = 16 dB with ceramic tiles
- EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 19 dB with laminate - EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 16 dB with glued down wood - EN ISO 140-8) (ISO 10140-1) (ISO 717-2)
ΔLW = 19 dB with LVT flooring - The above values are based on laboratory tests and determined according to DIN EN ISO 140-8 standards,which serve as guiding values. Actual effect and performance will determine on the specific construction and flooring. On site values can be determined by means of trial installation and measuring.
- Max surface load
- 2.5 kN/m²
- Max point load
- 3.0 kN allocated to 0.1 x 0.1-meter load distributing plate
- Thermal conductivity
- 0.080 W/mK
- Temperature delay
- 0.038 m²K/W
- Density
- Approx. 600-700 kg/m³
- Diffusion
- Diffusion-open
- Storage
- Should be stored in a dry location at constant temperature.