Products

Fast-setting screeding mortar "Mix"
Self-levelling compound "Mix"
Tanking systems
Tile adhesives "Fix"
Binder / Primer
Tile grouts
Cleaning and maintenance
Smooth rendering and paints
Acoustic underlay
- Acoustic PS3 - Recycled
  
  Acoustic underlay

Frontpage Products Binder / Primer JointBinder

JointBinder

Binder for cement-based grouts

For mixing into cement-based grouts
Increases mechanical wear resistance, flexibility and adhesiveness of the grout
Reduces the capillary absorption capacity of the grout
Improves the grout’s resistance to detergents and hard water
For interior and exterior use

Calculate

Retailers

Product information

Product

Polymer dispersion

Packaging

10 litre plastic container

Tests

EMICODE test defined by GEV, Gemeinschaft Emissionkontrollierte Verlegestoffe (Association for the
Control of Emissions in Products for Flooring Installation, Adhesives and Building Materials).

Technical data

Working temperature
- Min. +10°C
Density
- Approx. 1,0 kg/litre
Storage
- Approx. 12 months frost-free in unopened packaging

Technical enquiries

Product information for:
Alfix FineFuge CeraFill 5
Alfix QuickFuge Premium 8
Alfix UniversalFuge CeraFill 10
Alfix IndustryFuge CeraFill 18
Alfix RustiqFuge CeraFill 20
Material safety data sheet

General information

The joints must be clean of adhesive and loose particles and have a uniform depth before starting work. Adding Alfix JointBinder to the grout can, depending on the type of tile - e.g. matt, non-slip or open surfaces - make it extra difficult to remove any grout residue.

Application

How to use

Stir undiluted Alfix JointBinder into the grout until the desired consistency is achieved. Only use Alfix JointBinder to adjust the consistency of the grout.
Pour Alfix JointBinder into a clean container and add the powder gradually while stirring vigorously to produce a smooth, lump-free paste. Stir until a homogeneous, lump-free consistency is achieved. After a few minutes resting time, stir the grout thoroughly again before use.
Before applying the grout, wipe the tiles with a damp sponge. Apply the sealant with a grouting float diagonally across the joints, pressing it down and filling the joints completely. Once the grout is beginning to set, clean the surface using a well-wrung sponge; rinse the sponge regularly with clean water. Start by working diagonally until the joints are neat and even. Finish off with a final wipe of the surface with a wellwrung sponge. Limit the area to be grouted to avoid the grout setting on the tile surface.
To ensure optimal performance, it is important to keep the joints moist for the first few days after grouting.

Cleaning

Clean tools in water before the grout with JointBinder dries. Dried JointBinder is removed mechanically or with a solvent such as acetone.
It is recommended to wear protective gloves while working as the product adheres strongly to skin.

Film

Guidance

See how to use Alfix products for your construction projects.

See guides

Downloads

Grout colours

Download

Material Safety Data Sheet

Download