- For ceramic and quarry tiles, natural stone, large-sized tiles and porcellanato tiles
- For levelling, straightening of uneven screeds and slope building
- For interior and exterior use on floor and wall
- Suitable for low temperatures
- Grouting after 3 hours
- Long open time
- Smooth consistency
- Ideal for underfloor heating
- Very low emission: EC1 PLUS
- Bed thickness: 2 - 10 mm
Products
-
-
PlaneMix 90 PlusSemi-dry screeding mortar
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
1K sealing membrane
-
2K sealing membrane
-
Sealing Primer
-
Waterproofing membrane Pro
-
Epoxy Membrane
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Tanking accessories
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix PlusFlexible low-dust tile adhesive – Light
- Up to 600 x 600 mm -
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
Montagelim1-component all-round mounting adhesive
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
LetFix less dust - DISCONTINUED - replaced by LetFix PlusFlexible dust reduced tile adhesive - Light
-
LetFix - DISCONTINUED - replaced by LetFix PlusFlexible tile adhesive - Light
-
-
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Sealing Primer
-
FlexBinder
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
CombiQuickFix
Rapid setting flexible tile adhesive
Calculate
Retailers
Retailers
Product information
Product
Light grey, rapid setting, cement-based power containing high-performance polymer modifiers.
Coverage
Notched trowel
Coverage per m²
6 x 6 mm
approx. 1.7
8 x 8 mm
approx. 2.3
10 x 10 mm
approx. 2.9
12 x 12 mm
approx. 3.4
For levelling
approx.1.1 kg per mm thickness
Packaging
Available in 20 kg PE lined paper bags.
Precautions
 |
Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 12 |
Ydeevnedeklaration nr. 4 | EN 12004:2007+A1:2012 Alfix CombiQuickFix Hurtighærdende, cementbaseret fliseklæber med forbedret vedhæftning, deformation og åbentid. Inden- og udendørs anvendelse. |
| Brandklasse | NPD | Farlige stoffer | Se sikkerhedsdatablad på www.alfix.com |
| Vedhæftningsstyrke efter tørlagring | ≥ 0,5 N/mm² | Vedhæftningsstyrke efter tørlagring | ≥ 1,0 N/mm² |
| Vedhæftningsstyrke efter varmelagring | ≥ 1,0 N/mm² | Vedhæftningsstyrke efter vandlagring | ≥ 1,0 N/mm² |
| Vedhæftningsstyrke efter frost-tø lagring | ≥ 1,0 N/mm² |
Tests
DS/EN 12004 – DS/EN 12002
Technical data
- Working temperature
- +5°C - +30°C
- Density
- 1.4 kg/litre (mixed with water)
- Open time
- approx. 30 minutes
- Working time
- approx. 50 minutes at +20°C
- Foot traffic/grouting
- 3 hours at +20°C
- Foot traffic/grouting
- 12 hours at +10°C
- Full strength
- 3 days at +20°C
- Tensile adhesion strength concrete :
- 1.0- 2.0 N/mm²
- Classification - DS/EN 12004
- C2 FE S1
- Shelf life
- Min. 6 months in unopened bag
Application
Surfaces
Cement/sand rendering, brickwork, aerated concrete
Screed, older than 14 days.
Light-weight concrete, max. moisture content 8%
Flooring containing cement-based levelling compound.
Anhydrite floors, max. residual moisture 0.5%
Concrete in situ and precast units/slabs, older than 2 months.
Paper-faced plaster boards, fibre-reinforced plaster boards
Existing tiles, terrazzo
Vinyl and paint on concrete
Plaster, existing tiles, vinyl, and paint are not considered suitable surfaces for exterior use or in areas exposed to frequent or permanent water.
Surface preparation
The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner.
Ensure that paint is sufficiently adhering and non-flaking. Sand/Matt vinyl and paint with the appropriate sandpaper and apply a thin contact layer of Alfix CombiQuickFix.
Straightening of lumps and unevenness of up to 10 mm can be carried out using Alfix CombiQuickFix.
On absorbent, moisture sensitive interior surfaces, such as aerated concrete, gypsum plaster, plaster boards, and anhydrite floors, apply Alfix Primer (Sealing Primer) or Alfix PlaneMixPrimer
For exterior use, apply a thin contact layer of Alfix CombiQuickFix.
How to use
Add approx. 0.22-0.25 litres of clean, cold water per kg powder corresponding to 4.4-5.0 litres of ready mixture per 20 kg bag.
Apply Alfix CombiQuickFix to the surface with a notched trowel, using the straight edge to spread out adhesive and subsequently the notched edge to produce a ribbed bed.
Fix tiles within 15 minutes by pressing them firmly into position in the wet adhesive with a slight twisting action. When fixing mosaics, a firm tap is required.
Ensure complete adhesive coverage!
For tile sizes exceeding 60 X 60, apply adhesive to both tiles and surface to ensure solid bedding leaving no voids (buttering/floating method).
For exterior use, e.g. stairs and facades, regardless of tile size, always apply buttering/floating method.
Note!
Large-sized tiles and natural stone may call for extra attention.
Additional water should not be added to adhesive already starting to set. Note that the temperature of mixing water will influence setting time.
Repositioning of tiles should be done within 20-30 minutes after fixing, depending on substrate and tile absorbency.
Switch off any underfloor heating.
Cleaning
Clean adhesive residues from tools and tiles with water before the adhesive sets. Cement-based products harden when mixed with water, hence do not pour surplus adhesive into the drain system.
Product
Light grey, rapid setting, cement-based power containing high-performance polymer modifiers.
Coverage
Notched trowel
Coverage per m²
6 x 6 mm
approx. 1.7
8 x 8 mm
approx. 2.3
10 x 10 mm
approx. 2.9
12 x 12 mm
approx. 3.4
For levelling
approx.1.1 kg per mm thickness
Packaging
Available in 20 kg PE lined paper bags.
Precautions
|
Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 12 |
Ydeevnedeklaration nr. 4 | EN 12004:2007+A1:2012 Alfix CombiQuickFix Hurtighærdende, cementbaseret fliseklæber med forbedret vedhæftning, deformation og åbentid. Inden- og udendørs anvendelse. |
| Brandklasse | NPD | Farlige stoffer | Se sikkerhedsdatablad på www.alfix.com |
| Vedhæftningsstyrke efter tørlagring | ≥ 0,5 N/mm² | Vedhæftningsstyrke efter tørlagring | ≥ 1,0 N/mm² |
| Vedhæftningsstyrke efter varmelagring | ≥ 1,0 N/mm² | Vedhæftningsstyrke efter vandlagring | ≥ 1,0 N/mm² |
| Vedhæftningsstyrke efter frost-tø lagring | ≥ 1,0 N/mm² |
Tests
DS/EN 12004 – DS/EN 12002
Technical data
- Working temperature
- +5°C - +30°C
- Density
- 1.4 kg/litre (mixed with water)
- Open time
- approx. 30 minutes
- Working time
- approx. 50 minutes at +20°C
- Foot traffic/grouting
- 3 hours at +20°C
- Foot traffic/grouting
- 12 hours at +10°C
- Full strength
- 3 days at +20°C
- Tensile adhesion strength concrete :
- 1.0- 2.0 N/mm²
- Classification - DS/EN 12004
- C2 FE S1
- Shelf life
- Min. 6 months in unopened bag