Frontpage Products Self-levelling compound "Mix" UniversalPrimer

UniversalPrimer

Improves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency

Water-based primer for dense surfaces
Ready for use
Quick drying
Interior application
Easy to apply by roller

Retailers

Product information

Application

Surfaces

Non-absorbent surfaces such as smooth dense concrete, ceramic tiles, natural stone, and terrazzo.
Metal and surface treated wooden subfloors
Epoxy and paint
Vinyl and linoleum
Underfloor heating should be switched off during priming: Deactivate the installation 72 hours prior to
application and reactivate 7 days after completion of work at the earliest.

Surface preparation

The surface should be dimensionally stable, dry and free from dust, grease, laitance and cracks.
Residues from grease, wax and soap can be removed using Alfix Deep Cleaner.
Ensure that paint is sufficiently adhering and non-flaking.
Traces from vinyl, linoleum, wooden substrates should be removed by grinding prior to priming.
Matt or sand existing dense substrates, such as vinyl, linoleum, epoxy, and paint
Corrosion protect steel plates
Degrease stainless steel

How to use

Alfix Universal Primer is ready for use when thoroughly stirred.
Apply unto substrate by short-haired paint roller to obtain an even and thin coat leaving no visible puddles.
Leave to dry before further treatment is commenced.
Observe that room temperature, temperature at floor as well as product temperature should uphold min.
+10°C.
Levelling should be made within 72 hours upon priming.
If exceeding 72 hours, re-priming is required before levelling!
For further information, please consult our Technical Services Dept.

NB!
If there is any doubt as to suitability, it is recommendable to test whether Alfix UniversalPrimer adheres
sufficiently to the substrate on a less visible area before priming the entire area.
Adhesion strength should be min. 1 N/mm²

Cleaning

Clean residues from tools with water before the dispersion sets. Once dried, Alfix UniversalPrimer can be
removed mechanically.
Disposal of product residues, cleaning water and containers should be done in accordance with the local
rules in force.

Downloads

Product

1-component water-based polymer dispersion with sand aggregate, grain sizes up to max. 0.5 mm
Improves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent
substrates.
Rollable consistency
Colour – Natural white

Coverage

0.10 - 0.2 l/m²
corresponding to 150 – 250 g/m² depending on substrate.

Packaging

3 and 10 litre container made of recycled plastic

Tests

Low emission, GEV-EMICODE EC1 - test defined by the German institute Gemeinschaft Emissionskontrollierte
Verlegestoffe.

Technical data

Working temperature
- +10°C - +30°C
Density
- 1.33 kg/litre
Drying time
- Approx. 30 – 120 minutes *)
Coverage
- 0.1 – 0.2 litre/m² corresponding to 150 – 250 g/m² depending on substrate
pH
- Approx. 8.5
Shelf life
- Min. 12 months in unopened container. Keep protected from frost.

*) All technical data apply for ideal interior conditions (+20°C and 50% RF)
Values are, hence guiding..

Technical enquiries

-Alfix broshyr: ”Plana underlag - Gjutning och sparkling med PlaneMix”
-Produktinfo för Alfix Grundrens
-Säkerhetsdatablad
-Gulvbranchens ”Gulvfakta”

UniversalPrimer

Product

Coverage

Packaging

Tests

Technical data

Technical enquiries

Surfaces

Surface preparation

How to use

Cleaning

Guidance

Downloads

Product info

EPD

Material Safety Data Sheet

Product

Coverage

Packaging

Tests

Technical data

Technical enquiries