Frontpage Products UniversalFuge - CeraFill 10 UniversalFuge - CeraFill 10

UniversalFuge - CeraFill 10

Universal grout

For ceramic and quarry tiles, mosaics, and natural stone
For both moderately absorbent and non-absorbent tiles
Joints widths: 2 - 10 mm
Bright and intense colours
Water and dirt repellent
High mechanical strength and flexibility
For interior and exterior use
Provides an even and uniform surface
Smooth consistency

Calculate

Retailers

Product information

Product

Cement-based powder containing polymer modifiers. Added light stable pigments. Contains quartz sand with grain sizes up to 0.4 mm.

Coverage

0.5 - 1.5 kg per m² depending on tile size and joint width.

Packaging

5 kg og 20 kg plastlaminerede papirposer

Enhed	Farve	Varenr.	DB-nr.
5 kg	Hvid	4505	5208097
5 kg	Grå	4045	5102299
5 kg	Lysegrå	4515	5171974
5 kg	Manhattan Stålgrå	4525	5171976
5 kg	Koksgrå	4535	5171978
5 kg	Antracitgrå	4565	5171982
5 kg	Sortgrå	4545	1276280
5 kg	Lys beige	4555	5171980
5 kg	Jura beige	4585	1270775

Enhed	Farve	Varenr.	DB-nr.
20 kg	Grå	4041	1609629
20 kg	Lysegrå	4511	1588074
20 kg	Manhattan Stålgrå	4521	1670998
20 kg	Koksgrå	4531	1588084
20 kg	Antracitgrå	4561	1588077
20 kg	Sortgrå	4541	1680171
20 kg	Lys beige	4551	1588081

Tests

DS/EN 13888

Technical data

Working temperature
- +5°C - +25°C
Density
- 2.0 kg/litre (mixed with water)
Working time
- 1 - 2 hours at +20°C
Foot traffic
- After 24 hours vid +20°C
Full strength
- After 14 days at +20°C
Classification - DS/EN 13888
- CG 2 W A, high class
Shelf life
- Min. 12 months in unopened bags

Technical enquiries

Folderen: “Fliser og fuger – Rengøring og pleje med Alfix”
Alfix Rense/plejemiddelserie
Produktinfo for:
Alfix FineFuge - CeraFill 5
Alfix QuickFuge Premium 8
Alfix IndustryFuge - CeraFill 18
Alfix RustiqFuge - CeraFill 20
Alfix Syr a’
Sikkerhedsdatablad

General information

For moderately absorbent and non-absorbent ceramic and quarry tiles, mosaics, and natural stone.
Grouting can usually be made 48 hours after tiling has been completed. Joints should be clean, dry, free
from dust and loose particles from adhesive and bedding mortar Joint depth should appear uniform.

For grouting of certain types of receptive tiles, such as matt glazed or porous tiles, stains and excess grout can be very difficult to remove. In case of doubt, it is recommendable to do a trial application on a limited and less visible area to ascertain resistance.
Switch off any underfloor heating 3 days before tiling and do not re-connect until 14 days after completion.
Underfloor heating, ventilation, waste heat recovery systems, dehumidifiers, etc should be switched off during tiling. Deactivate all installations 72 hours prior to grouting and reactivate 14 days after completion of work at the earliest. Underfloor heating temperature increase should be by 5°C per 24 hours until preferred surface temperature is obtained.
Inlet temperature should be max. +35°C

Final appearance

Finished joints should be evenly filled and the colour should appear uniform.
The following conditions may affect the natural properties of the cement and cause colour differences:

Early cleaning with wet sponge may lighten the colour. This phenomenon is most likely to occur in case of dark colours.
Remedy: Clean off with acidic cleaner, such as Alfix Acid Wash.
Rapid drying may brighten the colour and produce a weak joint.
Remedy:Keep the surface damp for optimum hydration of the grout. Wet with damp sponge.
Repairs or visible seams after working breaks may cause colour differences.
Remedy: Remove the joints mechanically and re-grout the area. Wipe over and clean off the tiles several times with slightly damp sponge.
Moist from substrate and uneven absorption from tile edges may cause a locally darker colour. Remedy:Wash the area several times with a mixture of soap flakes and water.

Colours

Available in white, grey (unpigmented), pale grey, Manhattan steel grey, graphite, anthracite, black grey, light beige, and jura beige. Colour swatches available on request.

Application

Downloads

UniversalFuge - CeraFill 10

Product

Coverage

Packaging

Tests

Technical data

Technical enquiries

General information

Final appearance

Colours

How to use

Cleaning

Guidance

Downloads

Product info

Grout colours

EMICODE

EPD

Material Safety Data Sheet