Alfix Lime and grout remover

- Gentle acidic cleaning agent for effective dissolving and removal of lime and surface fouling
- Does not attack chromium or stainless steel
- Removes cement film from new tilings
- Suitable for sanitary use
Product facts
Product
Cleaning agent based on a mixture of phosphoric acid and active cleaning components.
For cleaning of sanitary areas.
Colours
Coverage
Coverage
1 litre per 20 – 40 m²
Packaging
1 litre and 2½ litres container
Features
Generel
Expected Result
Application
For removal of limescale deposits and cement film on ceramic tiles, quarry tiles, mosaics, vinyl, and stainless steel.
Do not use on marble and enamel.
Waterproofing
Surface preparation
Fixing dowels
Finishing
Sealings
Flooring
Precautions
Tile fixing
Tile fixing
Tests
Surfaces
Technical data
Concentrated: approx. 1.0
Diluted 1:10: approx. 2.0
Protect from frost
Min. 12 months stored at +20°C
How to use
Surfaces
Surface preparation
If any doubt regarding acid resistance of the surface, it is always recommendable to test the product on a less visible area or spot.
How to use
Pre-wet the surface with clean water.
Dilute Alfix Lime and Grout remover with water 1:5 - 1:10.
Apply the solution to the surface using a sponge. Prevent running causing visible trails.
After a working time of 5- 10 minutes, scrub the surface and rinse thoroughly with clean water.
Allow min. 24 – 48 hours upon grouting before removal of cement film.