- For preparation of different types of substrates prior to levelling
- Adjusts surface absorbency and improves adhesion
- For indoor and outdoor use
- Adheres to most surfaces
- High water resistance
- Low emission
Products
-
-
PlaneMix 90 PlusSemi-dry screeding mortar
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
1K sealing membrane
-
2K sealing membrane
-
Sealing Primer
-
Waterproofing membrane Pro
-
Epoxy Membrane
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Tanking accessories
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix PlusFlexible low-dust tile adhesive – Light
- Up to 600 x 600 mm -
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
Thixotropic agentAdditive for Alfix Epoxy Membrane and Epoxy Primer
-
Montagelim1-component all-round mounting adhesive
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
LetFix less dust - DISCONTINUED - replaced by LetFix PlusFlexible dust reduced tile adhesive - Light
-
LetFix - DISCONTINUED - replaced by LetFix PlusFlexible tile adhesive - Light
-
-
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Epoxy Primer 10 kg2-componenet epoxy primer
-
Sealing Primer
-
FlexBinder
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
EpoxyFuge 20 - TEMPORARILY UNAVAILABLE, Contact ALFIXAcid-resistant tile adhesive and grout
-
C2 Epoxy - DISCONTINUED, replaced by EpoxyFuge 20Acid-resistant grout and tile adhesive
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
PlaneMixPrimer
Primer for Alfix PlaneMix levelling compounds
Retailers
Product information
Product
Polymerdispersion
Packaging
Available in 2,5 litres and 10 litres plastic containers.
Tests
EMICODE test defineret af GEV, Gemeinschaft Emissionkontrollierte Verlegestoff.
Technical data
- Working temperature
- Min +10°C
- Density
- 1.0 kg/litre
- Drying time
- 1 hour at +20°C
- Shelf life
- Min. 12 months in unopened container. Keep protected from frost.
Application
Surface preparation
The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations.
Residues from grease or soap can be removed with Alfix Deep Cleaner. Ensure that paint work is sound and not flaking. Rough-sand/matt smooth or dense surfaces.
How to use
For absorbent surfaces, such as concrete, dilute Alfix PlaneMixPrimer with clean water in the ratio 1:3. For smooth or dense substrates, wash/brush the surface using a mixture of Alfix PlaneMix Primer and levelling powder in the ratio 1:2.
Outdoors: prime with Alfix PlaneMixPrimer diluted 1:6 with water.
Apply Alfix Primer to the surface with use of broom, brush, or roller and work it well into the surface leaving no visible puddles.
Allow primer to dry before commencing further treatment.
Ensure a room temperature of min. +10°C.
Min. drying time at +20°C: 1 hour.
Should levelling imply several layers, priming before each new application is required.
For very absorbent surfaces, extra priming may be required.
Cleaning
Clean residues from tools with water before the primer sets. Once dried, primer can be removed mechanically or with solvent.
Wear protective gloves during work since the product tends to stick strongly to the skin.